my house is old 1940 i need new windows and want to tear everything out and start with new windows instead of replacement ones is this a bad idea? How much extra work or cost will be involved
aluminum storm window manufacturers
I’m looking to get new windows for my house and some people have different spacing between windows like 7/8″ to 1″ and one says one is better than the other. But which one is?
anderson windows roof windows skylights
I am looking to install new windows in my house. I have done a some research, but need some additional help. i am debating doing new construction or replacement windows. i understand ultimately that it comes down to costs differences.
right off the bat: in terms of quality of build, and efficiency is a new contruction window better than a replacement window? right now, i am leaning towards going with Anderson 400 series tilt-wash double-hung windows.
Im my community (i live in a townhouse) almost everyone installs replacement windows. However, i plan on staying here for quite some time and am not looking for the cheapest possible option. Quality, efficiency and look all matter greatly to me…as well as resale value on my place when it comes time to sell.
So a friend of my mine who is a framer by trade wants to put in all new construction windows in my house. His idea is to take a measurement of the rough opening and then order the next smaller size window. In this case, I am going with Anderson b/c he gets a good deal on them.
So when we took measurements and then referred to the anderson book, we found that for all of my 13 windows, the next smaller size was only 1/2″ difference for both height and width.
with that, to make up the 1/4″ difference on each side, he wants to rip some 2×4 to fill in the 1/4″ difference. if it even needs it.
so basically… from what ive gathered, new construction windows will be almost a direct fit right into the original framing of the house. doing new construction will also allow me to make sure that the framing is structuraly sound. going with replacement, i might not find that out b/c from what ive learned, the old window frame is still used and only they only just pop out the trackings and glass.
i understand that we will have to take siding down in order to get access to the nailing flange and to nail in the new window…but we shouldnt have to trim the siding b/c the frame is staying the same size.
so is my logic correct? does this all make sense and sound like a much better way for me to replace the windows in my house is with new construction? the cost difference in materials is going to be about 2000-2500.
what does everyone think? stick with replacements or go the new construction route?
installing interior storm windows
Do you know of a somewhat cheap place other than home depot? They were more than Portland glass,,,,Thanks
house window awning